Water Quality Association Certifications

 

Aquathin achieved and has held WQA Gold Seal Certification for many years.   In 2015 Aquathin elected not to renew this certification in 2016 for the purpose of investing in and acquiring IAPMO Certification. The International Association of Plumbing and Mechanical Officials is a more prestigious and globally recognized brand in the architectural, construction, plumbing, diagnostics and residential marketplace.  Aquathin systems continues to comply with AND exceed Gold Seal Certification test and quality parameters.

 

 Water Quality Association

 

1/26/2016

CERTIFIED REVERSE OSMOSIS SYSTEMS

WQA S-300 (03/01/2000): Point-of-Use Reverse Osmosis Drinking Water Systems is within WQA's ANSI approved scope of accreditation under the Drinking Water Treatment Units Scheme

 

This section of the directory lists those water softeners which have been certified in accordance with "Voluntary Industry Standard For Household, Commercial, and Portable Exchange Water Softeners," S-100 and is published periodically by the Water Quality Association (WQA), as a service to the industry and consumers. The WQA is a not-for-profit international association of manufacturers, distributors, and dealers of water softeners and other water treatment systems for household, commercial, and industrial applications. This on-line directory is continuously updated to identify those water treatment equipment products that have been tested and passed stringent industry standards to become certified by the Water Quality Association. Certification means that a production line water softener was tested at the Water Quality Association laboratory, or any of the other testing laboratories recognized by the Water Quality Association, and was found to have met the standards for removal of hardness and reduction of specific contaminants. In addition, the materials and components used in these water softener systems must meet the rigorous safety and structural integrity requirements set by industry Standard WQA S-100. Stand-alone components certified for materials safety and structural integrity (as applicable) requirements only may also have notes indicating that the component has been tested for the reduction of specific contaminants. Because components certified only for materials safety and structural requirements are incapable of functioning without the use of additional components or by being placed into a complete system, performance reduction claims listed as a note are for informational purposes, shall not be considered certified, and may not perform exactly as stated when placed into a system.

Aquathin Corp.

950 South Andrews Avenue

Pompano Beach, FL 33069

United States

http://www.aquathin.com

 

Product Type: Countertop with Storage Tank or Reservoir

Brand Name

Model Number

Classic Traveler

RDT-2, C1225

Classic Traveler

RDT-XF, C1223

Kitchentop

KT90x-2, C12245

Kitchentop

KT90x-XF, C12123

Spacesaver

SS90-2, C1225

 

Product Type: Countertop with Storage Tank or Reservoir

Brand Name

Model Number

AquaKing

AK4023

AquaKing

AK40 DI23

Aqualite

AQL-2, C1225

Aqualite

AQL-XF, C1223

Platinum

PLT90-2, C1225

Platinum

PLT90-XF, C1223

Platinum

PSS90-2, C1225

Platinum

PSS90-XF, C1223

The Pearl

Pearl 3023

 

 

 

 

Product Type: Systems without Storage Tanks

Brand Name

Model Number

Aquathin

100+24K6

Aquathin

1200+24K6

Aquathin

600+24K6

 

  • 1 The "KT90x-XF, C12" in this model refers to the following products: KT90W-XF, C12; KT90S-XF, C12; and KT90B-XF, C12. The 'W' indicates the white model, the 'S' indicates the smoke grey model and the 'B' indicates the ice crystal blue model.

  • 2 Additional 3rd party testing for the patented Aquathin RODI complete systems are available on the Aquathin Website.

  • 3 The membrane in this unit is listed by the manufacturer as having a 45 gallon/day membrane.

  • 4 The "KT90x-2, C12" in this model refers to the following products: KT90W-2, C12; KT90S-2, C12; and KT90B-2, C12. The 'W' indicates the white model, the 'S' indicates the smoke grey model and the 'B' indicates the ice crystal blue model.

  • 5 The membrane in this unit is listed by the manufacturer as having a 24 gallon/day membrane.

  • 6 This product is certified for materials safety only.

     

    CERTIFIED WATER SOFTENERS

    WQA S-100 (03/01/2000): Household, Commercial, and Portable Exchange Cation Exchange Water Softeners is within WQA's ANSI approved scope of accreditation under the Drinking Water Treatment Units Scheme

     

    This section of the directory lists those water softeners which have been certified in accordance with "Voluntary Industry Standard For Household, Commercial, and Portable Exchange Water Softeners," S-100 and is published periodically by the Water Quality Association (WQA), as a service to the industry and consumers. The WQA is a not-for-profit international association of manufacturers, distributors, and dealers of water softeners and other water treatment systems for household, commercial, and industrial applications. This on-line directory is continuously updated to identify those water treatment equipment products that have been tested and passed stringent industry standards to become certified by the Water Quality Association. Certification means that a production line water softener was tested at the Water Quality Association laboratory, or any of the other testing laboratories recognized by the Water Quality Association, and was found to have met the standards for removal of hardness and reduction of specific contaminants. In addition, the materials and components used in these water softener systems must meet the rigorous safety and structural integrity requirements set by industry Standard WQA S-100. Stand-alone components certified for materials safety and structural integrity (as applicable) requirements only may also have notes indicating that the component has been tested for the reduction of specific contaminants. Because components certified only for materials safety and structural requirements are incapable of functioning without the use of additional components or by being placed into a complete system, performance reduction claims listed as a note are for informational purposes, shall not be considered certified, and may not perform exactly as stated when placed into a system.

    Product Type: DIR-Efficiency Rated

Brand Name

Model Number

Soft & Clean

ASC25K/F

Soft & Clean

ASC40K/F

Soft & Clean

ASC45K/F

Soft & Clean

ASC60K/F

 

Product Type: DIR

Brand Name

Model Number

Soft & Clean

SYNASC25K/F1

Soft & Clean

SYNASC45K/F1

Soft & Clean

SYNASC60K/F1

 

  • 1 This product is certified for material safety and structural integrity only.

     

     

  • CERTIFIED FILTRATION SYSTEMS

    WQA S-200 (04/06/2012): Residential and Commercial Water Filters is within WQA's ANSI approved scope of accreditation under the Drinking Water Treatment Units Scheme

     

    This section of the directory lists those water softeners which have been certified in accordance with "Voluntary Industry Standard For Household, Commercial, and Portable Exchange Water Softeners," S-100 and is published periodically by the Water Quality Association (WQA), as a service to the industry and consumers. The WQA is a not-for-profit international association of manufacturers, distributors, and dealers of water softeners and other water treatment systems for household, commercial, and industrial applications. This on-line directory is continuously updated to identify those water treatment equipment products that have been tested and passed stringent industry standards to become certified by the Water Quality Association. Certification means that a production line water softener was tested at the Water Quality Association laboratory, or any of the other testing laboratories recognized by the Water Quality Association, and was found to have met the standards for removal of hardness and reduction of specific contaminants. In addition, the materials and components used in these water softener systems must meet the rigorous safety and structural integrity requirements set by industry Standard WQA S-100. Stand-alone components certified for materials safety and structural integrity (as applicable) requirements only may also have notes indicating that the component has been tested for the reduction of specific contaminants. Because components certified only for materials safety and structural requirements are incapable of functioning without the use of additional components or by being placed into a complete system, performance reduction claims listed as a note are for informational purposes, shall not be considered certified, and may not perform exactly as stated when placed into a system.

     

    Product Type: Point-of-Entry

Brand Name

Model Number

Megachar

BFF-1

Megachar

BFF-2

Megachar

SYNBFF-11

Megachar

SYNBFF-21

 

  • 1 This product is certified for material safety and structural integrity only.